IP Dongle for PDU IP Remote Access

IPD-02-S
IPD-02-S
IPD-H02-S
  • Patented design
  • Hot pluggable for easy integration
  • Allows IP remote access to the PDUs by a single network IP
  • One IP dongle supports max. 16 PDUs in daisy chain
  • Highly cost effective method to access the intelligent PDUs
  • SNMP Capability v2 / v3

Temp. & Humid. Sensor

Temp. & Humid. Sensor
IG-TH01-2M / 4M
IG-T01-2M / 4M
  • External sensor with 2M or 4M cord
  • Plug & Play
  • Low profile design with magnetic base for easy affixing to the rack
  • Pair of sensors can be connected to one single W series PDU meter

Door Mount PDU Amp. / Temp. Display

External PDU Meter
IP-ED-02
  • Plug & Play
  • Support two PDU displays with amp. and temp.
  • Adjustable Mounting Kit for easy installation to rack door
  • Bundled 3m RJ-11 cable x 2

IEC Secure Sleeves

IEC Secure Sleeves

Sleeve attached to C14 power cord inlet:

IPP-SS-C13 ( pack of 200 )

Sleeve attached to C20 power cord inlet:

IPP-SS-C19 ( pack of 100 )
  • Secure the power cord connections to the PDU IEC outlets
  • Simple and cost efficient

MCB

Circuit Breaker

230V

  • 10A - 1-pole 10A MCB x 1
  • 13A - 1-pole 13A MCB x 1
  • 16A - 1-pole 16A MCB x 1
  • 20A - 1-pole 20A MCB x 1
  • 32A - 1-pole 16A MCB x 2
  • 63A - 1-pole 16A MCB x 4

110V / 208V

  • 15A - 1-pole 16A MCB x 1
  • 20A - 1-pole 20A MCB x 1
  • 30A - 1-pole 16A MCB x 2
  • Hydraulic magnetic circuit breaker
  • Overload switch
  • Designed to prevent accidental on / off operation
  • Safety Regulatory : UL / cUL / TUV / CE

Resettable Fuse

Resettable Fuse

230V

  • 10A - 1-pole 10A Fuse x 1
  • 13A - 1-pole 13A Fuse x 1
  • 16A - 1-pole 16A Fuse x 1
  • 20A - 1-pole 20A Fuse x 1
  • 32A - 1-pole 16A Fuse x 2
  • 63A - 1-pole 16A Fuse x 4

110V / 208V

  • 15A - 1-pole 16A Fuse x 1
  • 20A - 1-pole 20A Fuse x 1
  • 30A - 1-pole 16A Fuse x 2
  • Protected load segments for increased reliability
  • Overload reset button
  • Safety Regulatory : UL / cUL / CSA / TUV / CCC / VDE

Surge Protector

Surge Protector
Surge suppression: 2,700 Joules
Max surge current: 75,000 Amps
Max surge voltage: 6,000 Volts
Response Time: 1 nanosecond
Earth Red LED : Normal - on
Faulty - off
Protect Green LED : Normal - on
Faulty - off
  • Secure the power cord connections to the PDU IEC outlets
  • Simple and cost efficient

EMI Filter

EMI Filter

230V

  • 16A - EMI Filter x 1
  • 20A - EMI Filter x 1
  • 32A - EMI Filter x 2

110V / 208V

  • 15A - EMI Filter x 1
  • 20A - EMI Filter x 1
  • 30A - EMI Filter x 2
  • Line frequency : 50 / 60 Hz
  • Attenuation : Up to 50 dB
  • Suppresses conducted interference on a signal / power line

Colored Power Cords

C13-C14  3G 1.0 mm2  Power Cords
  • Visualizes the power sources
  • H05VV-F Cable
  • Rated voltage : 300V / 500V
  • Operating temp. : -40 °C to 70 °C
  • VDE approval
6ft / C13 - C14 ( 1.0 mm2 )
EC-6PC1314-B Blue
EC-6PC1314-R Red
EC-6PC1314-O Orange
EC-6PC1314-G Light Gray
10ft / C13 - C14 ( 1.0 mm2 )
EC-10PC1314-B Blue
EC-10PC1314-R Red
EC-10PC1314-O Orange
EC-10PC1314-G Light Gray
6ft / C19 - C20 ( 1.5 mm2 )
EC-6PC1920-B Blue
EC-6PC1920-R Red

Tool-less Button Kit / Mounting Bracket

IEC Secure Sleeves
VMS
VMB
VMS :
  • Quick and Tool-less integration simplifies PDU installation
  • Designed for particular global branded rack with key hole type mounting holes on rear verticals
VMB :
  • Universal mounting bracket supports all rack models