Options - Video Management & Transmission over Network


Embedded HDMI Decoder Module 1080p over IP

  • Decodes RTSP, RTMP, UDP, HTTP, HLS protocols
  • Supports video resolutions up to 1080p / 60Hz
  • Unicast and multicast support
  • Operates on standard 1000Mb Ethernet networks
  • Built-in Web UI for configuration and control
  • Excellent image quality with very low delay

Part no.

Embedded HDMI Decoder Module : UV-DE100F

Standalone HDMI Encoder : UV-EN100F

HDMI Decoder Module

Embedded HDMI Receiver Module 1080p

  • Extends the HDMI signal over a single Cat5/6 cable
  • Supports video resolutions up to 1080p / 60Hz
  • One to one just via Cat5/6 cable
  • One to multi via network hub and Cat5/6 cable
  • 100m maximum Cat5/6 cable distance
  • Supports bi-directional IR communication
  • High Speed HDMI 1.3 and HDCP 1.1 compliant
  • No software or drivers required

Part no.

Embedded HDMI Receiver Module : UV-R100F

Standalone HDMI Transmitter : UV-T100F

HDMI Receiver Module

Embedded HDMI Quad Display Module 1080p

  • Allows 4 x HDMI inputs to be monitored simultaneously
  • Quad split, panel left and full screen monitoring modes
  • High speed HDMI 1.3a and HDCP 1.2 compliant
  • Supports video resolutions up to 1080p / 60Hz
  • Supports Scaler Up and Down function
  • Control via local front panel and IR remote

Part no.

Embedded HDMI Quad Display Module : QD-1080

Embedded Quad Display Extension Module : QD-E1080

HDMI Quad Display Module

Embedded Multi Monitor OSD Control Module over serial

  • Remote control the monitor OSD via RS-232C serial interface
  • Daisy chain up to 64 monitors via Cat5/6 cable
  • Individual ID for individual monitor OSD settings
  • Power ON or OFF monitor
  • Adjust brightness & audio
  • Switch video sources

Part no.

Embedded Multi Monitor OSD Control Module : MCS

Multi Monitor OSD Control Module

Embedded 3G / HD / SD-SDI Input Module

  • Intelligent SDI monitoring with broadcast quality scopes
  • Supports multi-rate 3G / HD / SD-SDI format
  • Provides input to output loop-through capability
  • Auto format sensing & selection

Part no.

Embedded 3G / HD / SD-SDI Input Module : SDI

3G / HD / SD-SDI Input Module

Embedded Portrait Mode Module

  • Provides users with a rotation feature ( 0, 90, 180 & 270 orientation ) without frame delay via OSD
  • Allows distortion-free display of content in various orientations
  • Creates new application opportunities
Portrait Mode Module

Part no.

Embedded Portrait Mode Module : AD4.0-P


Embedded Auto Brightness Dimming Module

  • Brightness changes according to its ambient brightness
  • Its brightness change causes 10% increase or decrease
Auto Brightness Dimming Module

Part no.

Embedded Brightness Auto Dimming Module : DA-01


Embedded Manual Brightness Dimming Knob

  • Easy-to-use IP54 dimming knob on the front panel
  • One click causes 2% brightness increase or decrease
  • Brightness adjustment from 0% to 100%

Part no.

Brightness Dimming Knob : DS-01


Option — Infrared 10-point Touch

IR-10 Infrared
Technology Infrared
Touch Point 10
Input Type Pen, Finger, Finger of gloved hand activation
Touch Point Accuracy ± 2 mm
Response Speed ≤ 15 ms
Activation Force No minimum touch activation force
Touch Durability Unlimited
Glass Thickness 3 mm
Connector USB type-A
Operating System Windows 7 / Windows 10

Part no. : K65-IR10

** Dimension will be changed if multi-touch required


Option — DC Power

24V 48V
Input rating Input voltage 24-Volt 48-Volt
Input range 18 ~ 36V 36 ~ 75V
Input current No load 100 mA 50 mA
Full load 7,386 mA 3,611 mA
Output rating Output voltage 24-Volt 24-Volt
Output current 6.5A 6.6A
Efficiency 88% 90%
Part no. :
24VDC
48VDC