Video Management & Transmission over Network ( Options )


Embedded HDMI Decoder Module 1080p over IP

  • Decodes RTSP, RTMP, UDP, HTTP, HLS protocols
  • Supports video resolutions up to 1080p / 60Hz
  • Unicast and multicast support
  • Operates on standard 1000Mb Ethernet networks
  • Built-in Web UI for configuration and control
  • Excellent image quality with very low delay

Part no.

Embedded HDMI Decoder Module : UV-DE100F

Standalone HDMI Encoder : UV-EN100F

HDMI Decoder Module

Embedded HDMI Receiver Module 1080p

  • Extends the HDMI signal over a single Cat5/6 cable
  • Supports video resolutions up to 1080p / 60Hz
  • One to one just via Cat5/6 cable
  • One to multi via network hub and Cat5/6 cable
  • 100m maximum Cat5/6 cable distance
  • Supports bi-directional IR communication
  • High Speed HDMI 1.3 and HDCP 1.1 compliant
  • No software or drivers required

Part no.

Embedded HDMI Receiver Module : UV-R100F

Standalone HDMI Transmitter : UV-T100F

HDMI Receiver Module

Embedded HDMI Quad Display Module 1080p

  • Allows 4 x HDMI inputs to be monitored simultaneously
  • Quad split, panel left and full screen monitoring modes
  • High speed HDMI 1.3a and HDCP 1.2 compliant
  • Supports video resolutions up to 1080p / 60Hz
  • Supports Scaler Up and Down function
  • Control via local front panel and IR remote

Part no.

Embedded HDMI Quad Display Module : QD-1080

Embedded Quad Display Extension Module : QD-E1080

HDMI Quad Display Module

Embedded Multi Monitor OSD Control Module over serial

  • Remote control the monitor OSD via RS-232C serial interface
  • Daisy chain up to 64 monitors via Cat5/6 cable
  • Individual ID for individual monitor OSD settings
  • Power ON or OFF monitor
  • Adjust brightness & audio
  • Switch video sources

Part no.

Embedded Multi Monitor OSD Control Module : MCS

Multi Monitor OSD Control Module

Embedded 3G / HD / SD-SDI Input Module

  • Intelligent SDI monitoring with broadcast quality scopes
  • Supports multi-rate 3G / HD / SD-SDI format
  • Provides input to output loop-through capability
  • Auto format sensing & selection

Part no.

Embedded 3G / HD / SD-SDI Input Module : SDI

3G / HD / SD-SDI Input Module

Embedded Portrait Mode Module

  • Provides users with a rotation feature ( 0, 90, 180 & 270 orientation ) without frame delay via OSD
  • Allows distortion-free display of content in various orientations
  • Creates new application opportunities
Portrait Mode Module

Part no.

Embedded Portrait Mode Module : AD4.0-P


Embedded Auto Brightness Dimming Module

  • Brightness changes according to its ambient brightness
  • Its brightness change causes 10% increase or decrease
Auto Brightness Dimming Module

Part no.

Embedded Brightness Auto Dimming Module : DA-01


Embedded Manual Brightness Dimming Knob

  • Easy-to-use IP54 dimming knob on the front panel
  • One click causes 2% brightness increase or decrease
  • Brightness adjustment from 0% to 100%

Part no.

Brightness Dimming Knob : DS-01


Option — Projected Capacitive 10-point Touch

TPC-10 Multi-touch
Technology Projected Capacitive
Touch Point 10 point touch standard ( special requirement available )
Input Type Finger or Capacitive Stylus
Resolution 4096 x 4096
Touch Point Accuracy ± 2 mm
Response Speed < 5 ms
Activation Force < 5 g
Surface Hardness 6H
Light Transmission > 85%
Haze 3%↓
Durability 50 million touches
Top Layer 3 mm Glass
Bottom Layer 1.1 mm Sensor Glass
Thickness 4.3 ± 0.25 mm
Connector USB
Compatibility Windows / Linux / Android / Mac

Part no. : K32-TPC10

** Dimension will be changed if multi-touch required


Option — DC Power

24V 48V 125V
Input rating Input voltage 24-Volt 48-Volt 110-Volt
Input range 18 ~ 36V 36 ~ 75V 66 ~ 160V
Input current No load 50 mA 50 mA 40 mA
Full load 4,880 mA 2,442 mA 993 mA
Output rating Output voltage 24-Volt 24-Volt 24-Volt
Output current 4.16A 4.16A 4.16A
Efficiency 88% 90% 92%
Part no. :
24VDC
48VDC
125VDC