Video Management & Transmission over Network ( Options )

Embedded Multi Monitor OSD Control Module over serial

  • Remote control the monitor OSD via RS-232C serial interface
  • Daisy chain up to 64 monitors via Cat5/6 cable
  • Individual ID for individual monitor OSD settings
  • Power ON or OFF monitor
  • Adjust brightness & audio
  • Switch video sources

Part no.

Embedded Multi Monitor OSD Control Module : MCS

Multi Monitor OSD Control Module

Embedded 3G / HD / SD-SDI Input Module

  • Intelligent SDI monitoring with broadcast quality scopes
  • Supports multi-rate 3G / HD / SD-SDI format
  • Provides input to output loop-through capability
  • Auto format sensing & selection

Part no.

Embedded 3G / HD / SD-SDI Input Module : SDI

3G / HD / SD-SDI Input Module

Embedded Auto Brightness Dimming Module

  • Brightness changes according to its ambient brightness
  • Its brightness change causes 10% increase or decrease
Auto Brightness Dimming Module

Part no.

Embedded Brightness Auto Dimming Module : DA-01

Embedded Manual Brightness Dimming Knob

  • Easy-to-use IP54 dimming knob on the front panel
  • One click causes 2% brightness increase or decrease
  • Brightness adjustment from 0% to 100%

Part no.

Brightness Dimming Knob : DS-01

Option — e-Resistive 1-point Touch

TRB e-Resistive
Technology 5-Wire Resistive
Touch Point Single
Input Type Finger or Stylus
Resolution 2048 x 2048
Response Speed 15 ms
Activation Force ≤ 50 g
Surface Hardness 3H
Light Transmission 80% ± 3%
Haze 8% ± 3%
Durability 10 million touches
Top Layer ITO Film
Bottom Layer ITO Glass
Thickness 2.2 ± 0.2 mm
Connector USB Type-A
Compatibility Windows 7 / XP / Linux / Mac

Part no. : 17TRB

** Dimension will be changed if multi-touch required

Option — e-Capacitive 1-point Touch

TRB e-Capacitive
Technology Capacitive
Touch Point Single
Input Type Finger
Resolution 2048 x 2048
Response Speed 20 ms
Activation Force ≤ 50 g
Surface Hardness 9H
Light Transmission 92% ± 2%
Haze 7%
Durability 300 million touches
Top Layer Glass
Bottom Layer Glass
Thickness 2.8 mm ± 10%
Connector USB Type-A
Compatibility Windows 7 / XP / Linux / Mac

Part no. : 17TCB

** Dimension will be changed if multi-touch required

Option — Projected Capacitive 10-point Touch

TPC-10 Multi-touch
Technology Projected Capacitive
Touch Point 10 point touch standard ( special requirement available )
Input Type Finger or Capacitive Stylus
Resolution 2048 x 2048
Touch Point Accuracy ± 10 mm offset
Response Speed Max. 20 ms
Activation Force ≤ 10 g
Surface Hardness 7H
Light Transmission ≥ 88%
Haze ≤ 2%
Durability > 100 million touches
Top Layer 1.8 mm Glass
Bottom Layer Film
Thickness 2.2 mm
Connector USB Type-A
Compatibility Windows 7

Part no. : 17-TPC10

** Dimension will be changed if multi-touch required

Option — DC Power

12V 24V 48V 125V
Input rating Input voltage 12-Volt 24-Volt 48-Volt 110-Volt
Input range 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V
Input current No load 50 mA 50 mA 50 mA 35 mA
Full load 4,950 mA 2,450 mA 1,220 mA 749 mA
Output rating Output voltage 12-Volt 12-Volt 12-Volt 12-Volt
Output current 4.16A 4.16A 4.16A 6.25A
Efficiency 84% 85% 85% 91%
Part no. :
12VDC
24VDC
48VDC
125VDC